Full story

Driver/Controller Development Assistance Package For IDEX Health & Science MX II.
Full story

Operating Instructions Models 7725(i), 9725(i), 3725(i)-038, 3725(i), and 9125 Manual Sample Injector: Models 7725(i), 9725(i), 3725(i)-038, 3725(i), and 9125 are six-port sample injection valves in which the sample is loaded through a built-in needle port in the front of the valve.
Full story

Operating Instructions Model 8125 Manual Micro-Scale Sample Injector: Model 8125 is a six-port micro-scale sample injector with a built-in needle port in the handle for sample loading.
Full story

Operating Instructions Multi-Channel Vacuum Degasser: The Vacuum Degasser is a high-efficiency in-line module that removes dissolved gasses from HPLC solvents. Its unique design assures reliable continuous operation and the highest level of continuous performance available without the need for helium degassing.
Full story

Operating Instructions Models 7315 and 7335 Column Inlet Filters. Models 7315 and 7335 Column Inlet Filters protect the column inlet frit by trapping particles in the sample or wear particles in the injector. The filter minimizes column frit maintenance.
Full story

Operating Instructions Model 7125NS Syringe Loading Sample Injector. Model 7125NS is a six-port sample injection valve in which the sample is loaded through a built-in needle port in the front of the valve.
Full story

Operating instructions for Model 7750E-075 Motorized Valve Liquid End. This is a stainless steel motorized two-position, six-port sample injector.
Full story

Operating Instructions Model 7012, 9012 Loop Filler Port Model 9013 Needle Port. Loop Filler Ports (Models 7012, 9012) and Needle Port (Model 9013) are accessories for sample injection valves.
Full story

Installation of Transfer-Line Degasser 9000-1549. The unit can be vertical or horizontal in orientation. Flow can enter at the top or bottom of the unit.
Full story

Model 7125 Manual Sample Injector instructions. Model 7125 is a six-port sample injection valve in which the sample is loaded through a built-in needle port in the front of the valve.
Full story

The unit must be mounted with the vacuum fitting toward the top in a completely vertical orientation or at an angle no greater than 45º from vertical. Flow is intended to enter at the top of the unit (nearest the vacuum port) and exit the bottom.
Full story

Full story

Full story

Full story

Full story

Full story

Many applications benefit from tunable optical filters with the spectral and two-dimensional imaging performance characteristics of thin-film filters and the center wavelength tuning flexibility of a diffraction grating.
Full story

Recent advances in thin-film filter technology have enabled dramatic improvements in the performance of filters for laser-based analytical instrumentation.
Full story

Multilayer optical thin-film filters play a critical role in applications ranging from biomedical and analytical instrumentation to advanced laser systems. Learn why thin-film coating technology has been a technological breakthrough in biotechnology and other fields.
Full story