FlushNut™ Flangeless Fittings Instructions

1. Slide the FlushNut^™ and Flangeless Ferrule, in that order, over your tubing, with the tapered portion of the Ferrule facing towards the Nut.
2. Insert the assembly into the receiving port. Hold the tubing against the bottom of the port while finger tightening the Nut into place.

Please Note: IDEX Health & Science highly recommends using the FlushNut Wrench for installing and removing FlushNuts. Using the FlushNut Wrench, and while continuing to hold the tubing down into the receiving port, tighten until the Ferrule is completely seated.

Materials of Construction — 316 Stainless Steel